1. Top
  2. Other Equipment
  3. THT-microscope
  4. Specifications

ESTM-8

Specifications

Stimulus Output Number of Channels 8 Individual channels
(Two kinds of trains can be set in each channel.)
Spec of Output Terminal Resistance-changeable isolator: 2 channels
BNC terminal: 6 channels
Maximum Voltage ±62.5V (isolator outputs),
±12.5V (BNC outputs)
Trigger Mode Auto, Free-Run, External, Synchronization with other channels, Manual
Pulse Polarity Positive/Negative/Bipolar
Pulse Parameters Voltage, Width, Delay, Frequency, Interval , Pause, Repeat
Output with CSV program Isolator output: 1 channel
BNC output: 1 channel
Other Terminals Digital I/O
Analog Input Number of Channels 4 channels (In1~In4: BNC)
Input Range ±1.0V, ±2.5V, ±10V
A/D converter 16bit
Other Terminals Input Terminal for Pre-Amplifier
Digital Oscilloscope Number of Channels 2 channels
Input Analog Input Terminals (In1 and In2: BNC)
Sampling Speed 0.01~10msec
Display 256~1,024 sample, 0.01~10V
DC remove Manual, Auto
Window Discriminator Number of Channels 1 channel
Input Analog Input Terminals (In1: BNC)
Output LVTTL from Sync Terminal (BNC)
Mode 3 modes
Parameters Threshold-High/Low, Maximum Pulse Interval Time, Minimum Number of Train Pulses
Other Connection with PC USB cable

Page top


Other Equipment