Release Note for BV_Ana Ver.1304

Updates from Ver.1208

1. Additions in Analysis Functions - Available for MiCAM ULTIMA, MiCAM02, MiCAM01 data

1-1 New function for [Display Window for Wave Of ROI/Line] New Function to draw auxiliary line and display length of line were added.
1-2 New function for [Display Window for Merge] New function to magnify and demagnify data opened on [Display Window for Merge] window was added. This helps two data to be overlapped after data acquisition.
1-3 Modification for [Wave FFT] function Modified so that user can specify multiple frequency ranges for bandpass filter and notch filter.
1-4 Others and bug fixes ・ Fixed a bug in a [Measure] function on [Display window for stripe]-[Stripe Map].

・ Depending on magnification ratio of font on Windows operating system, failure of text display on the tab pages happens. To improve this inconvenience, new funciton ([Utility]-[Setting parameter for tab control]) was added. On the [Setting parameter for tab control], input a number 3-6. The number is up to setting on each PC. Smaller number makes each controls on the software horizontally long, and bigger number makes each controls horizontally short. This becomes effective after restarting the software (This doesn't usually need to be changed).

2. Additions in Data Acquisition Function (Available only for MiCAM02)

2-1 New function for [Acquisition Window]-[dual calculation process] New function to magnify and demagnify data opened on [Acquisition Window]-[dual calculation process] window was added. This helps two data to be overlapped.

2-2
Others and bug fixes ・ Fixed a bug that analog input channel #4 does not work when MiCAM02-CMOS camera is used.

・ Fixed a mismatch of pixel positions between monitor image and acquired data when mirror [horizontal] is selected in dual camera mode.

1. Additions in analysis functions - Available for MiCAM ULTIMA, MiCAM02, MiCAM01 data

(1-1) New function for [Display Window for Wave Of ROI/Line]

● Drawing auxiliary circle

An auxiliary circle which has center position specified with a mouse click and radius specified by inputting number, is drawn on [Wave Of ROI/Line].

Input size of one pixel in μm unit into ①[Unit] textbox. Then input radius of a circle in μm unit into ②[distance] textbox.
Select favorable color of line from ③ [Color] box.

Push ④[Auxiliary Circle Line] button and then, mouseclick on an image. A circle that has specified radius can be drawn on an image.

When this auxiliary circle is not necessary, push ⑤[Clear] button to delete an auxiliary circle.

By using this auxiliary circle as a reference, a straight line that has accurate length can be drawn.


● Display of distance

This function shows distance between two points specified on "Line" or "Polygon". Distance can be displayed by using value specified in ①[Unit] area.

Select ⑥[Display Line Length] checkbox. When this checkbox is OFF, this function is not available. Mouseclick on a line of "Line" or "Polygon". After a line is selected, a line can be drawn with dot and color selected in ⑦[Color] listbox, and length of selected line can be displayed at the area below this checkbox.

⑧[Clear] button clears display of distance.


(1-2) New function for [Display Window for Merge]

● New function ([zoom X][zoom Y]) to magnify and demagnify data opened on [Display Window for Merge] window was added. This helps two data to be overlapped after data acquisition. When a value in [zoom X] is changed, a value in [zoom Y] is changed simultaneously. On the other hand, change in a [zoom Y] value does not affect a [zoom X] value.


(1-3) Modification for [Wave FFT] function

● Modified so that user can specify multiple frequency ranges for bandpass filter and notch filter.



2. Additions in Data Acquisition Function (Available only for MiCAM02)

(2-1) New function for [Acquisition Window]-[dual calculation process]

● New function ([zoom X][zoom Y]) to magnify and demagnify data was added [dual calculation process] window. This helps two data to be overlapped before data acquisition. When a value in [zoom X] is changed, a value in [zoom Y] is changed simultaneously. On the other hand, change in a [zoom Y] value does not affect a [zoom X] value.

If data is acquired with [Second data with fitting] checkbox ON, settings including moving, rotation, magnification/demagnification of images specified on this window can be reflected to acquired data.

Parameter settings for this function can be saved by pushing the [Save Adjust Control] button.
Parameter settings for this function can be loaded by pushing the [Load Adjust Control] button.